RCC
Applications
Atop-Europe
Download here Atop Catalog
if not read well the News Letter Click here
To un-scribe from mailinig list send back a e-mail with "Cancell"
---------------------------------------------------------------------------------------------------------------------------------------------------------
ATOP Application White-Paper 08-11
IT-Ware Expand the functionality of SE5302 integrating wireless sensor network
ITware "Hungarian Atop Partner" has increase the "DATALOGGER" functionality on SE5302 including now the integration of T&D "wireless sensor network" and in detail of RTR-5 series that include temperature, umidity and pulse metering instrument.
Main features of IT-Ware Datalogger are:
- Configurable through a web based interface
- Handles 2 serial ports; targets to each serial port are configurable independently.
- Monitoring / trigger driven mode
- Data can be forwarded on HTTP or SMTP (e-mail) protocol
- NTP time synchronization
- Web-based user interface with authentication; displaying recent sensor data locally through web pages
- Stores read but unsent data in memory or on its flash drive.
.
T&D's RTR-50 wireless sensor network is a reliable and cost-effective solution for monitoring many locations at the same time. Sensors can be placed anywhere as long as they are reachable from the base station or any of the wireless router units. Thus the locations of the sensors can be chosen flexibly without worrying about cabling.
for more info you can contact IT-Ware at info@itware.eu or by Phone at +361 463 0620
---------------------------------------------------------------------------------------------------------------------------------------------------------
ATOP Application White-Paper 07-11
Industrial Managed Switch EH7510G...more reliability in Radio Link
New Managed Switch EH7510G include a special "U-RING" protocol able to manage a real "BACK-UP RING" in the new generation wirelless infrastructure, operating at 5 or 17 GHz License Free bands .
Infact working in these hi-frequency bands, the radio link could be lost for "BAD WEATHER CONDITION" also if the radio bridge continue to work properly. All existing "xx-RING protocolls" of common managed switches, detect (with different protocols) the fault on fisical ethernet interfaces and after this they provvide a new routing of data packet.
This approach is not enought if you have to manage a "Wireless Ring" in hi-frequency band, and hi-capacity band.
Working on "LOGICAL" interface each customer (network manager) can configure on which fisical interface any switches have to check the real connection, routing and by-passing any lost of data generated for unpredictable weather conditions.
EH7510x-xx represent today the most faster and reilable Industrial switch on the market, Railway certified and standard working from -40 +75 °C with less of 5 uSec latency
for more info contact us at lucasivori@atop.com.tw
---------------------------------------------------------------------------------------------------------------------------------------------------------
ATOP Application White-Paper 06-11
New Ethernet Switches EH-7xxxx for Motorway Sourvegliance Applications
Along the motorway there are a lot of equipments that could be connected to a TCP/IP network for a central/remote control like:
"METEREOLOGIC WHEATER STATION", "SOS TOWER", "VARIABLE MESSAGE PANEL", "VIDEOSOURVEGLAANCE CAMERAS" and other's.
With New EH-75xxx Series (Managed Ethernet Switches) and the previus EH-73xxx Series (Unmanage Ethernet Switches) is possible aproach the TCP/IP connectivity along the MOTORWAY with ROBUST, REILABLE and FASTER devices.
EH-75xxx is the solution for RING MANAGEMENT able to mantain "ALWAYS ON" the connectivity if one of network elements goes in fault or Fiber Optic link should be broken...
EH-73xxx is the solution for TCP/IP distribution along the fiber Optic Backbone normally installed along the motorway...in case equipments have one o more "SERIAL PORTS" could be use a ATOP SERIAL to ETHERNET converter (see for example the below "Atop Application white Paper 04-11).
ATOP EH-75xxx and EH-73xxx are EN50155 Certified Ethernert Switches (Railway Applications), support operating temperature range form -45 to 75°C and Extended power supply range from 9 to 48Vdc.
Building around a "Broadcom Chipset" are "most faster" devices with less of 5 uSEC of latency, and are available with 8 ports RJ45 (10-100 mbit/s) + 2 "Backbone" ports RJ45 (10-100-1000 mbit/s) or F.O SM-MM fiber (10-100 Mbit/s SC-connector) or Gigabit Ethernet SM-MM fiber (1000 Mbit/s SC-connector)
For more info please download documentation from EH-75xxx and EH-73xxx link or contac us at lucasivori@atop.com.tw
If don’t want receive more our white-paper application reply at this e-mail with "cancell"
---------------------------------------------------------------------------------------------------------------------------------------------------------
ATOP Application White-Paper 05-11
Serial Datalogger over SE5302 (power by ITware)
ITware is a Hungarian "Atop Partner Company" focus on custom SW and FW development solutions.
Based on ATOP SE5302 (not present like standard products on ATOP catalog), ITware developed a powerfull Serial Datalogger able to collect data from 2 serial ports (RS232-422-485) adding the Time-Stamp on each serial string, store each string on internal memory and send by FTP (via LAN-WAN connection) to different servers...
ITware Datalogger is a good solution to log data coming from any kind of meters provide of serial communication port, but could represente the perfect solution mainly for Energy Metesr and Photovoltaic Inverters. Please download datasheet and user guide of ITware Datalogger from Atop Europe web site
If you want evaluate your custom applications based on ATOP products please contat Mr. Sándor Dankó or Mr. Gyozň Drozdy direct in ITware
For any other request please contact lucasivori@atop.com.tw or others European Atop Distributors:
---------------------------------------------------------------------------------------------------------------------------------------------------------
ATOP Application White-Paper 04-11
EHG-2308 Gigabit Switch for "Vision in Manufacture"
The New EHG-2308 is a Powerfull Unmanaged 8 Ports Gigabit Switch design for high-bandwith and HIGH-SPEED applications in industrial market like "Industrial Vision System".
All new manufacter plants in Automotive, Electronics, Food & Beverage, Medical & Pharmaceiutical, Packaging and more markets, use today Hi-level Vision System to reduce the production defects, robot guide, quality control etc.
The process power of this devices require a HIGH-SPEED and LOW-LATENCY "communication link" like GIGABIT ETHERNET, supporting the 9 kbyte Jumbo Frame functionality.
Today ATOP EHG-2308 is the most powerfull and chiper 8 ports umanaged switch full support jumbo frame with double power Inputs from 9-48Vdc, Din-Rail mounting, and extend temperature Range from -10+70°C and represent the right solutions for connection of ALL Industrial Vision Systems.
For more info about Vision Systems you can visit some web sites like Cognex, Panasonic, SICK, Framos
For more info about EHG-2308 you can contact us at: lucasivori@atop.com.tw
If don’t want receive more our white-paper application reply at this e-mail with "cancell"
---------------------------------------------------------------------------------------------------------------------------------------------------------
ATOP Application White-Paper 03-11
TCP/IP Multiconnection on SE-5001 Sx
Atop has release the FW version SE5001M_v344 available for entry level serial-to-ethernet converter SE5001-Sx, that enable the multinconnection of max 4 PC (or hosts devices) t oa single Devices server, in order to share on internet a single serial device.
With this new FW SE5001-Sx manage the "data" traffic receiving the request from one of connected PCs and reply al all PCs in same time (Multicat). Multiconnection capability could be use on wired network (via ethernet switchs) as well on wireless (Wi-Fi) networks.
At the moment the new FW is available (free) only on request, for more info and to require the new fw please please send a mail to lucasivori@atop.com.tw.
---------------------------------------------------------------------------------------------------------------------------------------------------------
ATOP Application White-Paper 02-11
Using Atop EHG-2308 for 802.11n (300 Mbit/s) LAN to LAN wireless connection
Last Wireless directivity 802.11n permit free (unlicensed) Radio Communication with real bandwidth up 300 Mbit/s (depend on distance between 2 points). Some Access point operating in 5GHz band permit to reach more of 4 km with a real bantwidth of more of 100 Mbit/s. This technology is mainly used in BUILDING to BUILDING connection where is request a high efficiency of the connection.
New ATOP EHG-2308 with his 8 ports 10-100-1000 Mbit/s matching perfectly this kind of applications. EHG-2308 permit to have a great bantwidth and a very hi-speed operation because, like all ATOP industrial switches the latency is very low.
Little and robust could be installed (inside a outdoor box) on the roof close to Outdoor AP, his Temperature range permit to working fine from -10°C up 70°C. The reduntant power input accept from 9 to 48Vdc power supply and could be installed on Din-Rail or Wall with dedicate adapter.
ATOP EHG-2308 is certified CE, FCC and UL60950-1, for more info please contact us at lucasivori@atop.com.tw
---------------------------------------------------------------------------------------------------------------------------------------------------------
ATOP Application White-Paper 01-11
Using Atop SW5001 like wireless RS485 “Fieldbus Replacement”
SW5001 can be configured in a UDP mode to establish connection using Unicast or Multicast data from, the serial device to one or multiple host computers. Vice versa is also true. For example, the original 422/ RS485 bus can be transferred and extended connected distance by SW5001
The destination IP is assigned by single IP or group IPs, The configuration is limited by the Local Listening Port. For example, on SW5001 listening port is 4660 which receive data sending from the host computers. SW5001 can support up to 4-group IPs for UDP connection, if users needed.
If is not present a Wi-Fi network in the plant, is possible establish one with ATOP AW5300 For more info please download the user Manual of SW5001 or contact lucasivori@atop.com.tw
---------------------------------------------------------------------------------------------------------------------------------------------------------
ATOP application White-Paper 05-10
Using Atop MB5001C like modbus gateway in modbus wireless networks
The new ATOP MB5001C is a low cost simple to use ModbusTCP to ModbusRTU gateway. Could be use in any application where simple modbus conversion is require. In the example below is possible integrate a RS485 mesh wireless network to an ethernet lan
Ermes are wireless modbus nodes with one RS485 interface and a radio connection at 868MHz (with integrate antenna), are mainly used in building automation to collect data from distributed I/O. and PLC
MB5001C is the perfect solution for this kind of integration between the proprietary radio network and the standard LAN network inside building
---------------------------------------------------------------------------------------------------------------------------------------------------------
ATOP application White-Paper 04-10
Using Atop Ethernet Switch in Photovoltaic or Wind Tower plants
Atop Ethernet Switches match perfectly the request of strength and security in new GREEN ENERGY generation plants. The EH6508G-Fx is a robust and powerful managed gigabit switch able to manage an fiber optical ring with less of 10 mSec of recovery time in case of link loss.
The EH7310G-Fx is a unmanaged switch certify EN50155 able to operate in substation plant and performing with less of 5 uSec of latency. For Each substation are available up 8 ports (10/100 RJ45) to connect any kind of TCP/IP device (ex. videosourvegliance IP Cameras.).
In case of existing RS485 devices (DC-AC inverter, PLC, RTU etc.), could be connect at Ethernet ring via serial-to-ethernet device like SE5002 that provide 2 ports RS232-422-485.
Extended & redundant power inputs, extended temperature range, low latency are the common value of all ATOP switches.
In case of existing RS485 devices (DC-AC inverter, PLC, RTU etc.), could be connect at Ethernet ring via serial-to-ethernet device like SE5002 that provide 2 ports RS232-422-485.
Extended & redundant power inputs, extended temperature range, low latency are the common value of all ATOP switches
---------------------------------------------------------------------------------------------------------------------------------------------------------
ATOP Application White-Paper 03-10
Atop EH2305-Fx like media-converter in Videosourvegliance
Atop EH2005-Fx is a family of Robust Industrial Unmanaged Ethernet Switch with ONE Fiber Optic port (Fm=Multimode, Fs=singlemode) and FOUR RJ45 ports (10/100).
Should be very useful like replace of existing “low cost FO media converter” in Videosourvegliance applications, connecting on same optical link more of 1 devices, reducing the cost of solution increasing “value of fiber link”.
Using and external video Server and ATOP Serial-to-Ethernet converter (SE5002-S5) should be possible a integration between analog and digital video camera with relative PTZ unit (pan, tilt, zoom)
Main advantages between ATOP EH2305-Fx Vs. traditional media converter are:
- Industrial and robust solution in metal case, din-rail or wall mounting
- Extended temperature range for external applications -10+70°C
- Redundant and extended dual DC power inputs (9-30 VDC)
- Up 4 Ethernet devices on same fiber link, instead ones
- Good integration of analog and digital video systems
---------------------------------------------------------------------------------------------------------------------------------------------------------
ATOP application White-Paper 02-10
Using Atop Wireless Products and Vision Sensor in Production line
Atop EW5302 is a Wi-Fi 802.11b/g client able to wireless connection of any vision sensor (Cognex Dataman in example) for HI-SPEED qualify inspection in mass production line
With two RS232-422-485 ports and one Ethernet port, EW5302 can connect any kind of devices (Label printers, PLC etc) and the fast-roaming permit to connect the sensor in any “in-building mobile” application.
---------------------------------------------------------------------------------------------------------------------------------------------------------
Application White-Paper 01-10
Using Atop Wireless Products in Automatic Warehouse
Atop AW5300 is a robust, industrial grade, Wi-Fi 802.11b/g Access Point able to operate like Standard AP, like Bridge or in WDS (Wireless Distribution system). In this way is very simple create a good Wi-Fi network with a good coverage of each area where “mobile operators” have to move inside a Automatic Warehouse
Each AW5300 generate a Wi-Fi Cell concatenated one each others, inside this area a Wi-Fi Client like ATOP EW5302 can “surf” without loose communication.
ATOP EW5302 is a advanced industrial Wi-Fi client able to connect 1 Ethernet segment + 2 RS232-422-485 ports, this permit to have an “mobile operator” with Panel Pc, PLC, barcode reader and any other peripheral devices
ATOP EW5302 support fast roaming and the Threshold is user configurable in order to have the maximum reliability in mobile communication
For any other support please contact lucasivori@atop.com.tw